Step-By-Step Guide For Unclogging A Toilet With A Plunger
It’s not economical to call a professional plumber every time you have a toilet clog. This is especially unnecessary if it’s just a minor clog and the toilet is not even overflowing. You can always try to dislodge the clog with a plunger before reaching for the phone. But you should always remember that if the clog persists or if the toilet starts to overflow, then you need to call a professional plumber
immediately. Today you are going to learn how to unclog a toilet using a plunger. But before we proceed to the actual process, you need to have the right plunger for the job. And although all plungers may look similar, there is actually a special plunger for the toilet. This is called a flange or ball plunger and it has the same wooden or plastic handle but the bell-shaped rubber suction cup features a contoured bottom that fits snugly in the toilet bowl to create a vacuum seal. Follow the following steps to unclog your toilet with this specially designed flange or ball plunger.
Step 1: Place The Plunger Snugly Inside The Toilet Bowl
The first thing that you should do is to slowly lower the plunger inside the toilet bowl until it’s snugly positioned inside the bowl. The plunger releases all air bubbles as it’s lowered inside the toilet bowl to from a tight vacuum seal. This is what you will use to force the clog through the pipes.
Step 2: Perform Quick Plunging Motions Until The Water Level Falls
Hold the snugly positioned plunger in your hand and perform firm, quick plunging movements with your hand. This is the actual unclogging process because now you will be forcing the air through the pipes to dislodge the clog. Continue plunging firmly and quickly and observe the water level. If the blockage is moving, then the water level in the toilet bowl should drop with every plunging motion. You can now remove the plunger from the toilet bowl.
Step 3: Pour A Gallon Of Water Inside The Unclogged Toilet
Now that the water level has fallen in the toilet bowl, you can use a bucket to pour a gallon of water slowly into the bowl. This is the real test of your plunging success. If the water flows through and the level does not rise, then the clog has been dislodged and you can now flush the toilet without fear of overflow. But if the water level persists, then you should repeat the plunging motions until the water level falls. You should then pour another gallon of water in the toilet bowl to see whether the level drops or not.
Step 4: Call A Professional Plumber If The Clog Persists
If the water level refuses to drop when you are plunging the first time or after pouring the gallon of water, then you have a serious problem. You can repeat the plunging process to see whether you can force the clog further down the pipes until it’s down the sewer pipes. But if the toilet starts overflowing, then you need to request for Woodbridge plumbing repair services. You will need to call your local emergency plumber to unclog your toilet. Professional plumbers use their vast skills and experience to diagnose toilet clogs and to apply the viable remedy to unclog a stubborn toilet clog.
You might also like


